MARKETIER
18 Gauge Mobile Shelving

Easy to clean smooth shelf surfaces, with no-snag edges carefully folded and flattened.

  
Spec SheetRequest Quote

DESCRIPTION

Solid
Flat Surface
Stainless Steel - MSFC

Louvered
3/8" (375mm) louvers with 2" (51mm) embossments
Stainless Steel - MSLM

Embossed
2" (51mm) embossments with 2" (51mm) flat spaces
Stainless Steel - MSEM

Shelves:Each shelf is made of solid 18 gauge material with all four corners uniformly coped to exact contour to receive internal corner castings in crevice-free alignment. The premier of each shelf shall have a die formed raised marine edge, 3mm high on 7mm radius. The lower edge of the shelf perimeter shall be hemmed and pressed tight along the shelf length. Shelves will be shiped with screws for each corner to allow shelves to be installed  or adjusted at any desired spacing.

BENEFITS

• Precision built 18 Gauge steel with no-snag edges carefully folded and flattened to form a crevice free assembly with 1” O.D. steel posts.
• Easy to clean smooth shelf surfaces with raised marine edges and round corners.
• Unnecessary posts between adjacent units eliminated by use of exclusive shelf clips. Leaves corners clear.
• Shipped knocked down to reduce freight costs, Marketier is easily assembled on site.
• Approved by National Sanitation Foundation.

MODEL NUMBERS(s)

  

WIDTHS:
14” (356mm)
18” (457mm)
20” (508mm)
24” (610mm)

LENGTHS:
30” (762mm)
36” (914mm)
42” (1067mm)
48” (1219mm)
54” (1372mm)
60” (1524mm)

POSTS:
(1-1/4” (32mm) OD)

63” (1600mm) long with bullet feet

73” (1981mm) long with bullet feet