DESCRIPTION
SOLID - Stainless Steel
Flat Surface
Single Tier Model - WMSF
Double Tier Model - WDMSF
LOUVERED - Stainless Steel
3/8” (310mm) Louvers with 2” (51mm) Embossments
Single Tier Model Single - WMSL
Double Tier Model Single - WDMSL
EMBOSSED - Stainless Steel
2” (51mm) Embossments with 2” (51mm) Flat Spaces
Single Tier Model - WMSE
Double Tier Model - WDMSE
SHELVES:
Each shelf shall be made from one sheet of 18 gauge stainless steel with all four corners uniformly coped to exact contour to receive internal corner castings in crevice-free alignment. The perimeter of each shelf shall have a die-formed raised marine edge, (3mm) high on (7mm) radius. The lower edge of the shelf perimeter shall be hemmed and pressed tight along the shelf length. Shelves shall be shipped with set screws for each corner to allow shelves to be installed or adjusted at any desired spacing. Shelf corner casting shall have a hole to take 1” O.D. shelf posts. Shelves shall be available as required in any combination of the following widths and lengths as designed or as shown on plans.
BENEFITS
-
Precision built 18 Gauge steel with no-snag edges carefully folded and flattened to form a crevice free assembly with 1” O.D. steel posts.
-
Easy to clean smooth shelf surfaces with raised marine edges and round corners.
-
Unnecessary posts between adjacent units eliminated by use of exclusive shelf clips. Leaves corners clear.
-
Shipped knocked down to reduce freight costs, Marketier is easily assembled on site.
-
Approved by National Sanitation Foundation.
MODEL NUMBERS(s)
MSDF, MSDL, MSDE |
